Terms & Conditions

Our quotes are supplied E&OE  (Errors and Omissions Excepted).

Whilst we take great care to ensure our quotations are as accurate as possible based upon the information received, we respectfully ask that you check this quotation to ensure the frames outlined are to the specification you require and the correct quantity of frames have been quoted.

Please note unit sizes are an estimate. They cannot be guaranteed and it is not recommended that any units are ordered from these sizes. A contract needs to be processed as an order to generate accurate sizes.

Images used in our marketing may not always be an installation completed by Aluminium Projects and are representative of the type of installation that is possible using aluminium.

Due to the volatility in the market place our quotations are valid for 14 days. Delivery times are estimates and may change if there are delays in ordering or deposits being received. 

Last updated: October 2026

These Terms & Conditions apply to all quotations, orders and contracts entered into with Aluminium Projects Ltd (“the Company”), whether the Customer is a domestic or commercial customer.

By accepting a quotation and placing an order, the Customer agrees to these Terms & Conditions, which should be read alongside the Company’s written quotation and order confirmation.

1. COMPANY DETAILS

Aluminium Projects Ltd is a company registered in England and Wales.

  • Company name: Aluminium Projects Ltd

  • Company registration number: 10411159

  • VAT registration number: 453645972

  • Registered trading address: Unit 1 @ S18 Hub, Callywhite Lane, Dronfield, S18 2XP

  • Telephone: 01246 642 244

  • Email: info@aluminiumprojects.co.uk

  • Website: www.aluminiumprojects.co.uk

The Company supplies bespoke aluminium windows, doors, glazing systems and associated products sourced from established manufacturers and suppliers. Installation may be undertaken by the Company’s own personnel or approved installation subcontractors.

Unless expressly agreed otherwise in writing, the Company acts as a supplier and installer of products manufactured by third-party manufacturers. The Company is not itself the manufacturer or fabricator of the products supplied.

2. DEFINITIONS AND INTERPRETATION

For the purposes of these Terms & Conditions:

Company: Aluminium Projects Ltd.

Customer: Any individual, partnership, company, contractor, developer or organisation placing an order with the Company.

Domestic Customer: An individual purchasing goods or services wholly or mainly outside their trade, business, craft or profession.

Commercial Customer: A business, company, contractor, developer, landlord or other organisation purchasing goods or services for business or commercial purposes.

Goods: Bespoke aluminium windows, doors, frames, glass, hardware, accessories, glazing systems and other products supplied by the Company.

Services: Any surveying, measuring, delivery, installation or associated work specifically included in the quotation.

Quotation: The written estimate or proposal issued by the Company detailing the products, specifications, services and prices.

Contract: The agreement between the Company and the Customer, comprising the accepted quotation, these Terms & Conditions and any subsequent written variations agreed by both parties.

Site: The property or premises where the Goods are to be delivered or the Services are to be carried out.

Manufacturer: The third-party company responsible for manufacturing the Goods supplied by the Company.

References to the singular include the plural and vice versa. Headings are included for convenience and do not affect interpretation.

3. BESPOKE AND MADE-TO-MEASURE PRODUCTS

3.1 All products supplied by Aluminium Projects Ltd are bespoke or made to order. The Company does not operate as a supplier of standard off-the-shelf window and door products.

3.2 Products are sourced from specialist manufacturers and ordered specifically for each Customer’s individual requirements. This may include bespoke measurements, configurations, opening arrangements, colours, finishes, glazing specifications, hardware and accessories.

3.3 Products are manufactured to the specification agreed with the Customer and may not be suitable for resale to another customer.

3.4 The Customer is responsible for checking and approving the final specification before the order is submitted to the Manufacturer.

3.5 Once an order has been placed with a Manufacturer, changes or cancellations may not be possible without additional costs.

3.6 The bespoke nature of the Goods is relevant to the Customer’s cancellation rights. Goods made to the Customer’s specifications or clearly personalised may be exempt from the normal statutory change-of-mind cancellation right applicable to certain distance and off-premises contracts. This does not affect statutory rights relating to faulty, incorrectly supplied or misdescribed Goods.

4. QUOTATIONS AND ACCEPTANCE OF ORDERS

4.1 All quotations are valid for 14 calendar days from the date of issue unless otherwise stated.

4.2 Quotations are prepared using the information available at the time, including measurements, specifications, drawings, photographs and information supplied by the Customer.

4.3 The Company takes reasonable care to ensure quotations are accurate. However, quotations are issued subject to errors and omissions excepted (E&OE). This does not permit the Company to disregard an agreed contract or make material changes after acceptance without the Customer’s agreement.

4.4 The Customer must check the quotation carefully, including:

  • The quantity and type of frames.

  • Overall sizes and configurations.

  • Opening arrangements and handing.

  • Frame colours and finishes.

  • Glass specifications.

  • Hardware and accessories.

  • Delivery and installation requirements.

  • Any additional work included or excluded.

4.5 Any errors or omissions should be brought to the Company’s attention before the order is accepted.

4.6 Initial quotation sizes may be estimates only. They must not be used as final manufacturing sizes unless expressly confirmed in writing by the Company.

4.7 A contract will come into existence when the Customer accepts the quotation in writing, the Company confirms acceptance of the order and the required initial payment has been received, unless the parties expressly agree otherwise in writing.

4.8 The Company reserves the right to decline an order where it cannot fulfil the requested specification or where satisfactory payment arrangements cannot be agreed.

4.9 Any terms or conditions contained in a Customer’s purchase order will not automatically override these Terms & Conditions. Any agreed alternative terms must be expressly accepted by the Company in writing.

4.10 Any accidental typographical, clerical or administrative error identified before contract acceptance may be corrected. Once an order has been accepted, any material correction must be agreed with the Customer.

4.11 The Company reserves the right to charge for drawings, designs, surveys or other specialist work where this has been agreed in advance.

5. PRODUCT SPECIFICATIONS, SAMPLES AND IMAGES

5.1 All Goods are ordered from third-party manufacturers to the specification agreed with the Customer.

5.2 Product photographs, brochures, samples, website images and marketing material are intended to illustrate the products and the types of installation available. Images may show installations completed by manufacturers, suppliers or other installers and do not necessarily represent work completed by Aluminium Projects Ltd.

5.3 Colours displayed on computer screens, printed brochures and physical samples may differ slightly from the finished product due to lighting, display settings, coatings and manufacturing processes.

5.4 Minor variations in colour, texture, finish, glass appearance and other manufacturing characteristics may occur.

5.5 Glass may exhibit natural visual characteristics, including reflections, slight colour variations and other features associated with its manufacture. Relevant industry inspection guidance and manufacturer tolerances may be used when assessing reported glass defects, alongside the Customer’s contractual and statutory rights.

5.6 The final specification stated in the accepted quotation or written order confirmation will take precedence over general marketing descriptions.

5.7 The Company will not make material changes to an agreed specification without the Customer’s agreement, except where a change is required by law or regulation and is dealt with in accordance with clause 17.

6. MEASUREMENTS AND SITE CONDITIONS

6.1 Where the Company undertakes a site survey and final measurements, those measurements will be used to place the order with the Manufacturer.

6.2 Where the Customer or another contractor supplies measurements, the Customer is responsible for their accuracy unless the Company has expressly agreed in writing to verify them.

6.3 The Customer must provide accurate information about the Site, including access restrictions, unusual construction, structural conditions and any known concealed services.

6.4 Additional costs arising from incorrect information or measurements supplied by the Customer or another party may be charged to the Customer where the Company is not responsible for the error.

6.5 Where actual Site conditions differ materially from those described or reasonably apparent when the quotation was prepared, the Company may need to revise the specification, price or installation arrangements.

6.6 Any additional work or costs will be discussed and agreed with the Customer before being undertaken wherever reasonably practicable.

6.7 The Company does not undertake structural surveys unless expressly included in the quotation.

7. CUSTOMER-SUPPLIED DRAWINGS, DESIGNS AND MATERIALS

7.1 Where the Customer supplies drawings, plans, specifications, designs, images or other materials for use in the project, the Customer confirms that they have the necessary rights and permissions to provide and use those materials.

7.2 The Customer is responsible for ensuring that specifications supplied by them comply with applicable safety and regulatory requirements.

7.3 Where the Company uses Customer-supplied designs or materials, the Customer will be responsible for reasonable losses and costs arising from a third-party intellectual property infringement claim caused by the Company’s authorised use of those materials, to the extent that the infringement results from the Customer’s materials and not from any modification or misuse by the Company.

7.4 The Company’s own drawings, quotations, designs, specifications and other original materials remain the Company’s intellectual property unless otherwise agreed in writing.

7.5 The Customer must not reproduce, distribute or use the Company’s original drawings or designs for another project or supplier without the Company’s written permission.

8. PRICES AND VAT

8.1 All prices will be clearly stated in the quotation.

8.2 Unless otherwise stated, prices include VAT at the applicable rate.

8.3 The accepted quotation price will remain fixed following order acceptance, subject to agreed variations and the provisions below.

8.4 Additional charges may arise where:

  • The Customer requests changes to the original specification.

  • Additional work or materials are requested.

  • Incorrect or incomplete information has been supplied.

  • Unforeseen Site conditions require additional work.

  • Delivery or installation is delayed by circumstances attributable to the Customer.

  • Additional storage, transport or redelivery is required as a result of the Customer’s actions or omissions.

8.5 Any proposed additional costs will be explained and agreed before the additional work is undertaken wherever reasonably practicable.

8.6 If a quotation expires before acceptance, the Company reserves the right to revise the price to reflect changes in supplier prices, materials, transport, manufacturing or other costs.

8.7 Any discount, price reduction or special arrangement will only apply where confirmed by the Company in writing.

9. DEPOSITS AND PAYMENT TERMS

9.1 Unless otherwise agreed in writing, the Company’s standard payment arrangements are:

  • 40% deposit payable upon acceptance of the quotation and placement of the order.

  • 55% interim payment payable no later than the day before the agreed installation date.

  • 5% final balance payable upon practical completion of the installation.

9.2 All percentages are calculated against the total contract price, including VAT.

9.3 The initial deposit enables the Company to place orders with Manufacturers and suppliers, commit to the project and allocate resources.

9.4 The Customer acknowledges that the Goods are bespoke and ordered specifically for their project.

9.5 Payment of a deposit or interim payment does not transfer ownership of the Goods to the Customer. Ownership is dealt with separately under clause 21.

9.6 Where a different payment arrangement is agreed, it must be confirmed in writing.

9.7 The Company may delay placing an order with a Manufacturer or arranging installation until the required payment has been received in cleared funds.

9.8 All invoices must be paid by their stated due dates.

9.9 If an agreed payment is not received, the Company may suspend further work, postpone delivery or rearrange installation after giving the Customer reasonable notice.

9.10 Reasonable additional costs directly resulting from a payment-related delay, including storage, redelivery and rearranged installation charges, may be charged to the Customer where permitted by law.

9.11 The final balance is payable upon practical completion, notwithstanding minor outstanding snagging items which do not prevent the installation from being used for its intended purpose. This does not affect any statutory rights or any agreed right to withhold payment.

9.12 Where an invoice is disputed, the Customer should notify the Company promptly, giving details of the dispute. Any undisputed amount remains payable in accordance with the agreed payment terms.

10. CANCELLATION BY THE CUSTOMER

10.1 Any request to cancel an order must be made in writing by email to info@aluminiumprojects.co.uk.

10.2 The date of cancellation will be the date the Company receives the written cancellation request, subject to any applicable statutory cancellation rules.

10.3 The financial consequences of cancellation will depend on the stage the order has reached and the costs reasonably incurred or committed by the Company.

10.4 Where cancellation takes place before orders have been placed with Manufacturers or third-party suppliers, the Company may deduct reasonable direct costs already incurred in connection with the project, where legally recoverable.

10.5 Where orders have already been placed with Manufacturers or suppliers, the Customer may be responsible for reasonable costs which the Company cannot recover, including:

  • Manufacturer cancellation charges.

  • The cost of Goods already manufactured or in production.

  • Bespoke glass, hardware, accessories and special finishes.

  • Supplier administration or restocking charges.

  • Delivery, collection or transport charges already incurred.

  • Reasonable surveying, design and administration costs already incurred.

  • Reasonable subcontractor cancellation charges.

  • Other direct costs reasonably and properly incurred for the project.

10.6 Where Goods have been manufactured or are in production, the Customer may be liable for the reasonable direct financial loss resulting from cancellation, taking account of any costs saved by the Company and any amounts recovered through cancellation, return or resale.

10.7 The Company will take reasonable steps to minimise any losses arising from cancellation.

10.8 Any deductions from payments already received will be explained to the Customer. Any remaining balance after permitted and properly evidenced costs have been deducted will be refunded.

10.9 The Company will not automatically retain the entire deposit simply because an order has been cancelled.

10.10 Nothing in this clause removes or restricts any statutory cancellation rights available to a Domestic Customer.

11. DOMESTIC CUSTOMER CANCELLATION RIGHTS

11.1 Domestic Customers may have statutory cancellation rights under the Consumer Contracts (Information, Cancellation and Additional Charges) Regulations 2013 where a contract is entered into online, by telephone or away from the Company’s business premises.

11.2 Where applicable, a Domestic Customer generally has 14 days to cancel a service contract, beginning the day after the contract is entered into.

11.3 For goods, the normal statutory cancellation period generally runs for 14 days from the day after the Customer receives the goods.

11.4 However, the normal change-of-mind cancellation right for goods does not apply to goods made to the Customer’s specifications or clearly personalised. As the Company supplies bespoke products, this exemption will generally apply to its made-to-measure products where the legal requirements are met.

11.5 The exemption for bespoke goods does not remove separate statutory cancellation rights relating to installation or other services.

11.6 Where a Domestic Customer has a statutory right to cancel, the Company will provide the required cancellation information and instructions.

11.7 Where a Domestic Customer requests that installation or other services commence during an applicable 14-day cancellation period, the Company will obtain the required express request in writing.

11.8 If the Customer subsequently exercises a statutory cancellation right after requesting an early start to services, the Customer may be required to pay a proportionate amount for services properly performed up to the point of cancellation, where permitted by law.

11.9 The Customer will only lose the statutory right to cancel a service contract where the applicable legal conditions for loss of that right have been satisfied, including the required express consent and acknowledgement.

11.10 Where statutory cancellation rights are exercised, any refund or permitted deduction will be dealt with in accordance with the applicable legislation.

11.11 Nothing in these Terms & Conditions removes or restricts any statutory rights or remedies available to Domestic Customers.

12. CANCELLATION OR TERMINATION BY THE COMPANY

12.1 The Company may suspend or terminate a contract where the Customer:

  • Fails to make an agreed payment after being given reasonable notice.

  • Repeatedly fails to provide access or necessary information.

  • Provides materially incorrect information affecting the order.

  • Fails to provide suitable Site conditions for installation.

  • Prevents the Company or its contractors from carrying out the agreed work.

  • Commits a material breach of the contract and fails to remedy it within a reasonable period after written notice.

12.2 Where the Company terminates a contract because of a Customer’s breach, the Company may recover reasonable direct costs and losses arising from that breach, subject to applicable law.

12.3 If the Company is unable to fulfil an order for reasons within its control, it will contact the Customer to discuss an appropriate solution.

12.4 Where the Company cannot supply the agreed Goods or Services and the contract is terminated, any refund due will be made in accordance with the Customer’s contractual and statutory rights.

12.5 The Company will not terminate a contract without reasonable grounds.

13. DELIVERY AND INSTALLATION DATES

13.1 Delivery and installation dates are estimates unless expressly confirmed as fixed dates in writing.

13.2 The Company will make reasonable efforts to meet estimated delivery and installation dates.

13.3 Delays may occur due to circumstances outside the Company’s reasonable control, including:

  • Manufacturing or supplier delays.

  • Material or component shortages.

  • Transport and delivery problems.

  • Adverse weather conditions.

  • Unforeseen Site conditions.

  • Delays caused by other contractors.

  • Events outside the Company’s reasonable control.

13.4 If a significant delay occurs, the Company will inform the Customer and provide an updated estimated timescale.

13.5 Where a delay is caused by the Customer, including failure to provide access, complete preparatory work or make an agreed payment, the Company may rearrange installation and recover reasonable additional costs directly resulting from the delay.

13.6 Nothing in this clause removes any statutory rights relating to delivery or performance within a reasonable time.

13.7 Where an order is to be delivered or installed in stages, the Company may arrange separate deliveries or installation visits. The payment arrangements for each stage will be as stated in the quotation or subsequently agreed in writing.

14. DELIVERY, ACCESS AND UNLOADING

14.1 Unless otherwise agreed, delivery will take place at the Site specified in the accepted quotation.

14.2 The Customer must ensure that there is suitable access for delivery vehicles and installation personnel.

14.3 The Customer must notify the Company in advance of any restricted access, parking restrictions, difficult access, unusual delivery requirements or significant distance between the delivery vehicle and the Site.

14.4 Where the Customer is required under the quotation to provide unloading equipment or assistance, this must be available at the agreed delivery time.

14.5 Additional charges may apply where difficult access, special lifting equipment, additional labour or other arrangements are required and were not included in the quotation.

14.6 If the Customer is unable to accept an agreed delivery, the Company may charge reasonable additional costs for abortive delivery, storage, insurance, redelivery and associated handling.

14.7 Where Goods cannot be delivered because the Customer has failed to provide appropriate instructions, access, permissions or other necessary arrangements, the Company may arrange secure storage until a new delivery date is agreed.

14.8 Any storage, insurance, handling or redelivery charges must be reasonable and properly attributable to the delay.

14.9 The Company will contact the Customer to agree arrangements for delayed delivery. Any disposal or resale of bespoke Goods will be dealt with lawfully and with proper regard to the parties’ contractual rights.

15. CUSTOMER RESPONSIBILITIES AND SITE PREPARATION

15.1 The Customer must ensure that the Site is ready and suitable for the agreed work.

15.2 Unless otherwise agreed in writing, the Customer is responsible for:

  • Providing safe, prompt and unobstructed access to and from the Site.

  • Ensuring the installation area is clear of furniture, personal belongings and obstructions.

  • Removing or protecting curtains, blinds, fittings and other items that may be affected by the work.

  • Providing suitable electricity and other necessary facilities.

  • Advising the Company of any access restrictions or unusual Site conditions.

  • Advising the Company of any concealed services, pipes, cables or other hazards.

  • Obtaining any necessary planning permission, building approvals, landlord permissions or other consents, unless expressly included in the quotation.

  • Ensuring that structural alterations and preparatory building work are completed by appropriately qualified contractors.

  • Providing reasonable cooperation to enable the Company to complete the work.

15.3 The Customer must inform the Company of any known structural defects, defective lintels, unstable walls, asbestos or other unusual conditions before installation begins.

15.4 Where requested and agreed, the Customer must provide suitable secure storage for Goods, tools and equipment delivered to the Site before installation.

15.5 The Customer must take reasonable steps to protect items and belongings which could be affected by the installation work.

15.6 The Customer must ensure that materials and surfaces onto which products are to be installed are of adequate strength and suitability to support the products and associated fixings.

15.7 Where openings are to be prepared by the Customer or another contractor, they should be clean, suitably formed and within the tolerances specified by the Company or Manufacturer.

15.8 Where the Site is not ready or suitable for installation, the Company may postpone the work and charge reasonable additional costs arising directly from the postponement.

15.9 The Company will not be responsible for defective workmanship undertaken by other contractors or for damage caused by work undertaken by others.

15.10 Where structural work is involved, the Company recommends that the Customer obtains appropriate advice from a structural engineer before work begins. Unless expressly included in the quotation, the cost of obtaining such advice is the Customer’s responsibility.

16. REMOVAL OF EXISTING WINDOWS AND DOORS

16.1 Removal of existing windows, doors and frames will only be included where expressly stated in the quotation.

16.2 Unless otherwise agreed, the Company is not responsible for:

  • Removal or replacement of existing window boards or internal trims.

  • Removal or replacement of existing plaster, tiles or decorative finishes.

  • Structural alterations or repairs.

  • Replastering, decorating or redecorating.

  • Replacement of damaged sills, lintels or brickwork.

  • Electrical, plumbing or other associated work.

  • Making good surrounding surfaces beyond the work specifically included in the quotation.

16.3 Removal of existing frames can result in disturbance to surrounding plasterwork, render, brickwork, tiles or decorative finishes.

16.4 The Company will take reasonable care during removal and installation but cannot guarantee that existing surrounding finishes will remain undamaged where they are defective, poorly bonded, fragile or unsuitable for the work involved.

16.5 Any additional repairs or making good required will be discussed with the Customer and agreed separately.

16.6 The Customer is responsible for removing or securing personal belongings and other items in the working area before installation begins.

16.7 The Company will not be responsible for loss or damage to items left in the working area which the Customer could reasonably have removed or secured, except where caused by the Company’s negligence or other breach of its legal obligations.

17. VARIATIONS AND ADDITIONAL WORK

17.1 Any changes to the original specification, products, quantities or installation requirements must be agreed in writing.

17.2 The Company is not obliged to accept a requested variation.

17.3 Where a variation is accepted, the Company will explain any additional costs and any effect on the expected delivery or completion date before proceeding.

17.4 Additional work requested after installation has commenced may result in additional labour, material, delivery and subcontractor costs.

17.5 The Company may make changes required to ensure compliance with applicable safety or regulatory requirements. Any material effect on the agreed specification or price will be discussed with the Customer.

17.6 No material substitution of Goods will be made without the Customer’s agreement, except where required by law or where a replacement of equivalent specification is expressly agreed.

18. INSTALLATION AND WORKMANSHIP

18.1 Installation will be undertaken with reasonable care and skill by the Company or its appointed installation subcontractors.

18.2 The Company will use reasonable efforts to ensure that products are installed in accordance with relevant Manufacturer instructions and applicable requirements.

18.3 The Customer must allow the installation team reasonable access to complete the work.

18.4 Installation dates and working hours will be agreed in advance.

18.5 The Customer should inspect the completed installation and notify the Company of visible concerns or outstanding snagging items as soon as reasonably practicable.

18.6 The Company will investigate reported installation issues and arrange appropriate remedial work where it is responsible.

18.7 Customers should allow the Company a reasonable opportunity to inspect and remedy any reported problem before arranging third-party repairs or alterations, except where urgent action is reasonably necessary to prevent further damage or danger.

18.8 Nothing in these Terms & Conditions limits the Company’s responsibility for defective installation or any other breach of its legal obligations.

19. WARRANTIES, GUARANTEES AND PAYMENT IN FULL

19.1 Products supplied by the Company may carry manufacturer warranties or guarantees, depending on the product and Manufacturer.

19.2 Manufacturer warranties are subject to the relevant Manufacturer’s own terms and conditions.

19.3 Details of applicable manufacturer warranties will be provided or made available to the Customer where relevant.

19.4 Any additional voluntary guarantee or warranty offered directly by Aluminium Projects Ltd in respect of its own installation workmanship or additional services will only become effective once the full contract price, including all agreed additional charges, has been received in cleared funds.

19.5 Where an account remains outstanding, any additional voluntary guarantee benefits offered by the Company may be suspended until payment has been made in full, to the extent permitted by law and the terms of the relevant guarantee.

19.6 The Company cannot guarantee that a third-party Manufacturer will honour or provide a manufacturer warranty where the Manufacturer’s own terms and conditions have not been satisfied.

19.7 The Company will assist with manufacturer warranty claims where reasonably appropriate.

19.8 This payment condition does not remove or restrict any statutory rights or remedies available to Domestic Customers, including rights relating to faulty goods, goods not as described or services not carried out with reasonable care and skill.

19.9 Any manufacturer warranty is in addition to the Customer’s statutory rights against the Company and does not replace those rights.

19.10 Damage caused by misuse, accidental damage, lack of maintenance, unauthorised alterations, failure to follow manufacturer care instructions or other causes outside the Company’s responsibility may not be covered by a voluntary guarantee or manufacturer warranty.

20. COMPLAINTS AND DEFECTS

20.1 Any complaint or concern should be reported to the Company as soon as reasonably practicable by telephone or email.

20.2 The Customer should provide details of the issue and, where possible, photographs to assist the Company in assessing the matter.

20.3 The Company will acknowledge and investigate complaints within a reasonable period.

20.4 Where the Company is responsible for a defect or installation issue, it will arrange appropriate remedial action in accordance with its contractual and statutory obligations.

20.5 The Customer should not arrange third-party repairs or alterations to disputed work without first giving the Company a reasonable opportunity to inspect and, where appropriate, remedy the problem, except where urgent action is reasonably necessary to prevent further damage or danger.

20.6 Any time limits specified by a Manufacturer for reporting manufacturing or transit damage should be followed where reasonably practicable, but do not remove any statutory rights or remedies available to the Customer.

20.7 Nothing in this clause requires a Domestic Customer to report a defect within three days or any other period that would unlawfully restrict their statutory rights.

21. OWNERSHIP, RETENTION OF TITLE AND RISK

21.1 All aluminium frames, windows, doors, glass, hardware, accessories and other Goods supplied by Aluminium Projects Ltd remain the property of the Company until all sums due under the relevant contract, including the full contract price and any agreed additional charges, have been received in cleared funds, to the extent permitted by law.

21.2 Payment of a deposit or interim payment does not transfer ownership of the Goods to the Customer.

21.3 Where Goods have been manufactured, delivered to Site or stored at the Customer’s premises but have not yet been installed, they remain the property of the Company until payment in full has been received, to the extent permitted by law.

21.4 Until ownership has transferred, the Customer must take reasonable care of the Goods and must not sell, transfer, dispose of or otherwise deal with them in a manner inconsistent with the Company’s ownership rights.

21.5 The Customer must notify the Company promptly if any unpaid Goods are lost, stolen or damaged.

21.6 Where payment remains outstanding, the Company reserves its legal rights in respect of the unpaid Goods.

21.7 Any recovery or repossession of Goods will only be undertaken where legally permitted and with any necessary consent or lawful authority. The Company will not enter premises or remove installed products without the necessary legal authority.

21.8 Where Goods have been installed and incorporated into a building, the Company’s retention-of-title rights may be affected by the law relating to fixtures and fittings. Nothing in this clause gives the Company an automatic right to remove installed frames or doors from a property.

21.9 Risk of loss or damage will pass in accordance with applicable law and the agreed delivery and installation arrangements. Where Goods are delivered before installation, the Customer must take reasonable care to protect them from damage, theft and adverse weather.

21.10 Retention of ownership does not automatically mean that risk remains with the Company.

22. CONFIDENTIALITY AND INTELLECTUAL PROPERTY

22.1 Each party may receive confidential information from the other in connection with a project.

22.2 Each party agrees to use confidential information only for the purposes of the contract and not to disclose it to third parties without permission, except where disclosure is required by law or reasonably necessary to fulfil the contract.

22.3 The Company’s original quotations, drawings, designs, specifications and other original materials remain the Company’s intellectual property unless otherwise agreed in writing.

22.4 Nothing in this clause transfers ownership of Manufacturer trademarks, product designs or other intellectual property belonging to third-party Manufacturers.

22.5 The Customer may use the Company’s project documents for the purpose for which they were supplied, but must not reproduce or use them for another project or supplier without the Company’s written permission.

23. LATE PAYMENT AND NON-PAYMENT

23.1 Payment is due on the dates specified in the accepted quotation and relevant invoices.

23.2 Where a Domestic Customer fails to pay an undisputed invoice by its due date, the Company may issue a payment reminder and take reasonable steps to recover the outstanding amount.

23.3 For Commercial Customers, the Company reserves its rights to charge statutory interest and compensation under the Late Payment of Commercial Debts (Interest) Act 1998, where applicable.

23.4 The Company may recover reasonable debt recovery costs where legally permitted.

23.5 Failure to make an agreed payment may entitle the Company to suspend further work, postpone delivery, withhold future services or terminate the contract in accordance with these Terms & Conditions.

23.6 The Company may apply payments received against outstanding invoices in accordance with applicable law and any agreed payment allocation.

23.7 Any outstanding sums properly due will remain payable following termination of a contract.

23.8 Nothing in this clause removes any rights the Customer may have to raise a genuine dispute about an invoice or exercise a statutory right to withhold payment.

24. COMMERCIAL CUSTOMERS

24.1 Where the Customer is purchasing for business or commercial purposes, these Terms & Conditions apply as the basis of the contract, subject to any specific written agreement.

24.2 Commercial Customers are responsible for ensuring that the products and specifications ordered are suitable for their particular project and intended use, having regard to the information and advice supplied by the Company.

24.3 Commercial Customers must ensure that the Site is ready for delivery and installation and that all necessary permissions, approvals and coordination with other contractors have been arranged.

24.4 Project-specific requirements, including delivery schedules, phased installations, site inductions, health and safety documentation, unloading arrangements and payment terms, must be agreed in writing before work commences.

24.5 Unless otherwise agreed in writing, the standard payment terms in clause 9 apply.

24.6 Commercial Customers must notify the Company of any relevant project specifications, site restrictions or contractual requirements before accepting the quotation.

24.7 Any agreed retention, staged payment or alternative payment arrangement must be confirmed in writing.

24.8 The Company reserves its rights under the Late Payment of Commercial Debts (Interest) Act 1998 where applicable.

25. LIMITATION OF LIABILITY

25.1 Nothing in these Terms & Conditions limits or excludes liability for death or personal injury caused by negligence, fraud or fraudulent misrepresentation, or any other liability which cannot lawfully be excluded or limited.

25.2 The Company will not be responsible for loss or damage caused by pre-existing structural defects, unsuitable Site conditions, defective work undertaken by other contractors or circumstances outside its reasonable control, except to the extent that the Company has caused or contributed to the relevant loss or damage.

25.3 The Company will not be responsible for delays or additional costs caused by the Customer, other contractors or circumstances outside the Company’s reasonable control, subject to applicable law.

25.4 For Commercial Customers only, and to the extent permitted by law:

(a) The Company will not be liable for indirect or consequential losses, including loss of profit, loss of business, loss of opportunity or loss of anticipated savings.

(b) The Company’s total aggregate liability arising from or in connection with the relevant contract, whether in contract, tort or otherwise, shall not exceed the total contract price paid or payable under that contract.

25.5 The limitations in clause 25.4 do not apply to liability which cannot lawfully be limited or excluded.

25.6 For Domestic Customers, nothing in these Terms & Conditions excludes or restricts statutory rights or remedies under the Consumer Rights Act 2015 or other applicable consumer protection legislation.

26. EVENTS OUTSIDE OUR CONTROL

26.1 The Company will not be in breach of contract where performance is prevented or materially delayed by events outside its reasonable control.

26.2 Such events may include:

  • Severe weather.

  • Fire, flood or other natural events.

  • War, terrorism or civil disturbance.

  • Government restrictions or regulatory action.

  • Industrial action.

  • Transport or delivery disruption.

  • Manufacturer or supplier failure.

  • Material or component shortages.

  • Manufacturing interruption.

  • Other unforeseen events beyond the Company’s reasonable control.

26.3 The Company will inform the Customer of any significant effect on the project and take reasonable steps to minimise disruption.

26.4 Where an event continues for an extended period and the contract can no longer reasonably be performed, either party may discuss termination of the contract.

26.5 Any payments, refunds or outstanding liabilities arising from termination will be dealt with fairly and in accordance with the contract and applicable law.

27. DATA PROTECTION

27.1 The Company will handle personal information in accordance with applicable data protection legislation and its Privacy Policy.

27.2 Customer information will be used for legitimate business purposes, including quotations, order processing, delivery, installation, warranty administration and customer service.

27.3 Personal information will not be sold to third parties.

27.4 Information may be shared with Manufacturers, suppliers, delivery companies and installation subcontractors where reasonably necessary to fulfil the contract.

28. GENERAL PROVISIONS

28.1 These Terms & Conditions, together with the accepted quotation and any written variations, form the agreement between the Company and the Customer.

28.2 Any variation to the contract must be agreed in writing by both parties.

28.3 Failure by the Company to enforce any provision of these Terms & Conditions does not constitute a waiver of its rights.

28.4 If any provision is found to be invalid or unenforceable, the remaining provisions will continue to apply.

28.5 The Company may use approved subcontractors to carry out installation or other agreed services. The Company remains responsible for its contractual obligations to the Customer.

28.6 No person who is not a party to the contract shall have rights to enforce its terms under the Contracts (Rights of Third Parties) Act 1999, except where expressly agreed otherwise.

28.7 Neither party may transfer its contractual rights or obligations to another party without the other party’s agreement, except where permitted by law.

28.8 Any notice required under these Terms & Conditions must be given in writing by email or post to the contact details provided by the relevant party.

29. DISPUTES AND GOVERNING LAW

29.1 The Company aims to resolve complaints and disagreements through reasonable discussion and communication.

29.2 If a dispute cannot be resolved informally, either party may pursue the remedies available to them under the law.

29.3 Nothing in these Terms & Conditions prevents a Domestic Customer from bringing a claim in the appropriate court or exercising any applicable statutory rights.

29.4 These Terms & Conditions and any contract entered into with the Company shall be governed by the laws of England and Wales.

29.5 The courts of England and Wales shall have jurisdiction, subject to any applicable consumer rights regarding where proceedings may be brought.


ALUMINIUM PROJECTS LTD

Unit 1 @ S18 Hub, Callywhite Lane, Dronfield, S18 2XP

Telephone: 01246 642 244

Email: info@aluminiumprojects.co.uk

Company Registration Number: 10411159

VAT Registration Number: 453645972

Website: www.aluminiumprojects.co.uk